Excavator Novice Needs To Understand The Slope Operation Precautions

Sometimes excavator operators need to work on the ramp to improve efficiency. In fact, the operation on the slope is still very dangerous. Once the operation is not good, the excavator will dangerously lean back.

Next, I will simply share with you the experience I have summarized over the past few days so that everyone can avoid risks.

First of all, the direction of the excavator must be flat, you must pay attention! If the work on the slope is not on a flat surface, if the uneven ground is shaken twice on a flat surface, the uneven ground on the slope will cause the center of gravity of the machine to be unstable and dangerous.

The second point is to avoid too fast when lifting the boom, because if it is too fast, the center of gravity of the machine will be retreated, causing the center of gravity of the machine to turn backwards, posing a danger.

The third point, when the middle arm is excavated, the first thing is that you can't talk about the pile of soil in front of the machine. Also, don't spend too much time in the bauxite. This can cause some relatively large clods to roll off when they are too fast. Machine and people.

The fourth point, pay attention to the cooperation of the boom when closing the middle arm, mainly to prevent the machine from being jacked up when the boom is closed, which causes the center of gravity of the machine to be dangerous.Tonkee Company has ten years experience in excavator spare parts area.

The fifth point, when rotating, should not be too fast, too fast will lead to rapid changes in the center of gravity of the machine. Also, before each rotation, you should look around to prevent it from entering the machine.

The sixth point, when going backwards, avoid going straight back. If you can keep going, don't think you can go straight back. This idea is wrong. You should turn the machine over.

View more:Tonkee