Rainy Day Excavator Maintenance Method

In this article, let's talk about several aspects of rainy day excavator repair for your reference.

1. Timely cleaning

In case of heavy rain, it should be cleaned up in time.

2. Paint surface

The acidic components in the rainwater have a strong corrosive effect on the surface of the excavator paint, which can damage the paint surface of the excavator over time. Therefore, in the rainy season, it is best to paint the excavator. The easiest way is to wax. In a long time, the sealing effect is better. Regardless of the method used, the excavator should be coated with an invisible protective layer to prevent fading and aging of the paint surface.

3. Chassis care

The chassis is closest to the ground, especially affected by road conditions. In general, this part is most prone to rust, and the wheel casing may even loosen the perforations. Therefore, it is necessary to pay attention to the cleaning and anti-rust treatment of the excavator chassis, and to do the anti-rust treatment of the chassis.

4. Ignition start

On rainy days, if you run into problems where the engine is not easy to start, sometimes it will be weak even if you barely start it. The most likely cause of this problem is that the ignition system is leaking due to moisture, thus losing the normal ignition function.

Once the ignition system performance is found to be poor, the ignition performance is poor and the engine performance is degraded. It is best to wipe the inside and outside of the distribution plate and wire with a dry paper towel or a dry cloth, and then spray the desiccant with a special desiccant spray can. At the switchboard cover, battery connector, line connector, high voltage line, etc., the engine can be started after a period of time.