Excavator Cleaning Mud Skills Sharing

The position of the release device is very important. From the above, the hand must be slow, and the heart can't eat hot tofu. It is best not to use wheeled excavators in silt environments because wheel excavators can easily get stuck in the mud, unlike crawler excavators. It is more flexible and slippery in some ways. When the road is walking, it is easy to slip and unnecessary property loss occurs.

In this case, the best construction machinery partner is a track widening excavator, which is marked "LC" on cars and loaders. Because even if the crawler excavator is now in the mud, use an excavator to pull the mud around the excavator to the side, and then pull it out with a larger horsepower loader. This is also an important point.

In the case of deep mud, we usually use steel excavators, small excavators with around 1-2 steel plates and 200 excavators with 3-4 steel plates. However, when using an excavator to pick up steel plates, this is not a problem for drivers with rich driving experience, but for excavator apprentices and novices, this is really difficult, but as long as everyone has mastered the steel plate, The skill is that the steel plate can be easily picked up in this work.

The preparatory movement of the steel plate is the same as the preparation operation when the excavator performs the leveling operation. First, find the right place for the excavator and move on to the next step.

Next, gently turn the blade of the bucket to the outside, and then slowly extend the shovel under the steel plate to reach about 1/3 of the steel plate.

In the third step, slowly move the bucket to the inside, then lift the starter arm up and then extend the arm outwards, as this will prevent the steel plate from being lifted and hit the excavator once. Cab.

The technique for selecting steel plates is as described above. There is also the fact that the excavator driver's friend is required to pay attention to the fact that when the steel plate is placed, it is impossible to turn the excavator to a certain position and rotate the bucket. The steel plate is heavy. If it is as easy as tamping soil, it is easy to roll the excavator due to the weight of the steel plate.

When we put the steel plate in, we can extend the arm slightly to the side of the cab. If the distance of the arm is too far, the machine will roll the object.