Excavator Walking Matters Need Attention to Avoid Rollover

During the operation of the excavator, the situation of the excavator rollover occurs due to the driver's operation or environmental conditions. Therefore, for your reference, we summarize some of the problems that the excavator needs to pay attention to during walking.

1. When reversing the excavator, it is necessary to predict the parking space in advance. It is best to ask someone to direct behind.

2. The excavator should walk straight on the ramp as far as possible while the bucket is at a certain distance from the ground. If there is a slipping, roll, etc., lower the bucket immediately. If there is a stall stop on the ramp, place the bucket on the ground immediately, place the lever in the neutral position, and restart the engine.

3. Before the excavator walks, check the road surface, clear the obstacles on the road, let the unrelated personnel stay away from the excavator, and then raise the bucket to start the excavator.

4. When the excavator is walking, try to choose a flat road surface to avoid the rotation of the upper turntable. When walking on a bad ground, avoid the hard object from hitting the travel motor and the crawler frame.

5. Check the direction of the track frame before starting to determine the position of the drive wheel.

6. Try to avoid the excavator walking in the water. If it is necessary to launch the water, be sure to check the depth of the water and the hardness of the bottom of the water in advance. If the underwater mud is too deep, or the water surface exceeds the track, it is not suitable to walk.

7. The driver should control the walking speed according to the road condition. When walking on the open flat ground, you can select “1”, and you can select “0”when going up and down.