When it comes to excavators, there are many opportunities in the South and fewer opportunities in the North. Places that are often trapped are usually places with more water. There are groundwater, rainwater, lakeside, fish ponds, digging foundations, and unloading. In the yard, eradicating the excavator is both cumbersome and laborious. It may also be accompanied by tracks, so how to avoid and get rid of it. Let's discuss it below.
To the above, where the soil may be soft, you must first test it, push it down with a bucket, try not to enter more than four-fifths of the bucket, and the chain of your own excavator. To have a full understanding, you must always leave yourself behind the road. It is not good to ask other drivers at the construction site to improve their feelings. Peers will help each other.
In order to get rid of the fault, the excavator should always be kept as flat as possible and adjusted in time. Excavators are difficult to move in the mud. Basically, it is necessary to use the power of the bucket to move forward. Remember, the excavator cannot be supported too high. The deeper the support, the deeper the support. Sometimes it can be removed. The excavator was stuck because the bracket was too high. Other excavators cannot be pulled out. The turntable is stuck and the ground is inside. It is also mud, try to adjust to a straight line, steel plate is the best, you can also use cement blocks, large, rescue methods are generally in the middle and sides of the excavator mud.
No comments:
Post a Comment